|
| |
Super Sand
Super Sand - Never Weed Again!
Description
Polymer Sand
is a unique mixture of polymer binders and a calibrated sand available in beige
or slate grey. The installation of Polymer Sand
is almost identical to using regular paver joint sand, except for the
application of water. Once Polymer Sand
sets, it becomes very firm and locks between the paver joints. This firm bond
maintains pavers securely in place, being equally effective on both horizontal
and sloped surface.
Features
- Can be used on joints up to 1 inch
- Prevents Weed Growth
- Prevents Ant Hills
- Prevents Erosion
- Ideal for sloping areas, pools, driveways and sidewalks
Coverage
Application
NEW PAVER JOB:
1. Install pavers and compact.
2. Make sure the top of the pavers are dry. Sweep Polymer Sand in between the
paver joints and then compact.
3. Sweep off all excess sand on the paver surface. Insure Polymer Sand lies 1/8
of an inch below the top of the paver (repeat step 2 if necessary).
4. Direct a fine mist of water in the air to dampen all the Polymer Sand joints.
Dampen until there is some water retention on the paver joints (30 seconds).
5. Minimize or avoid, if possible, walking on the pavers for at least 4 hours
after the installation of Polymer Sand.
|
