SRW Adhesive

Description

SRW Adhesive is a superior strength solvent-based adhesive that has proven it's strength and reliability for over 30 years. It works on wet or frozen surfaces, in high or low temperatures and creates a permanent bond. There's not much this adhesive can't do. And it fits in a standard caulking gun either 10 ounce or 28 ounce, so no special equipment required.

 

Coverage:

10-ounce: 1/4" bead = 32 feet & 3/8" bead = 14 feet

28-ounce: 1/4" bead = 89 feet & 3/8" bead = 35 feet

Varieties Available:

10.5oz tube

28oz tube

Instructions

1. Surfaces must be clean and free from oil, grease, excessive water, ice or any other material that may interfere with proper adhesion.

 2. Cut tip on slant for 1/4˝ to 3/8˝ bead. Puncture inner seal with nail or wire and place in cartridge gun.

 3. Apply adhesive to one of the surfaces in a continuous bead. Follow application guidelines below.

 4. Apply no more adhesive than you can cover in 10 minutes.

 5. Press surfaces together firmly. For faster curing, lift top product and immediately reposition (flash).

 6. Vertical applications require permanent horizontal support.

Common Uses:

  • Retaining Walls
  • Pavers
  • Blocks
  • Firepits
  • Concrete
  • Metals
  • Wood
  • Natural Stone